362

462

562

862

Rick Rhuland 862 Deburr System.jpg

  • 0 to 12” diameter

  • Table-top style

  • Up to 3 tools

  • PLC control

  • Color operator screen

  • Dual Quick-Set feature

  • 0 to 12” diameter

  • Automatic front door

  • Up to 3 tools

  • PLC control

  • Color operator screen

  • Dual Quick-Set feature

  • Wet and dry options

  • 0 to 24” diameter

  • Manual front door

  • Up to 4 tools

  • PLC control

  • Color operator screen

  • Dual Quick-Set feature

  • Wet and dry options

  • 6 to 60” diameter

  • Manual front door

  • Up to 4 tools

  • PLC control

  • Color operator screen

  • Dual Quick-Set feature

  • Wet and dry options


Dual Quick-Set is a feature that we introduced to save our customers time and money. The Quick-Set allows the user to store two-sets of settings for the tooling. So, things like the on/off status of all tools, the tool durations, delays, and other variables can be saved to the two Quick-Sets.

  • This is extremely useful when flipping parts where one side needs the burr cut off, the chamfer created, and the teeth brushed, and the other side needs just a chamfer and brush…no burrs removed. You can use the Quick-Set toggle to bounce between the two different sides in a split second

  • Or perhaps you stack your parts in the hob. Only one part has an exit burr but the rest do. Then you can run certain tools for all of the parts and for the one part with an exit bur, you can toggle the Quick-Set to run the extra tool

  • Maybe some parts you want chamfered and deburred but you use the Quick-Set toggle to only wash other parts